Roland SH-4d Digital Desktop Synthesizer - Manual (Page 100)

MFX Parameters
100
Phaser Type
Phaser
A phase-shifted sound is added to the original sound and modulated.
Parameter Value Explanation
Mode
4-STAGE, 8-STAGE, 12-
STAGE
Number of stages in the phaser
Manual 0–127 Adjusts the basic frequency from which the sound will be modulated.
Rate Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System) (P.76)
Rate 0.05–10.00 [Hz] Frequency of modulation
Rate Note Note (P.167)
Depth 0–127 Depth of modulation
Polarity
INVERSE, SYNCHRO Selects whether the left and right phase of the modulation will be the same or the
opposite.
INVERSE: The left and right phase will be opposite.
When using a mono source, this spreads the sound.
SYNCHRO: The left and right phase will be the same.
Select this when inputting a stereo source.
Resonance 0–127 Amount of feedback
Feedback
-98–+98 [%] Adjusts the proportion of the phaser sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Mix 0–127 Level of the phase-shifted sound
Low Gain -15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-frequency range
Level 0–127 Output Level