Auto assign function – Roland SH-4d Digital Desktop Synthesizer User Manual
Page 42
Creating a Tone
42
AUTO ASSIGN function
When you use the knobs to confirm both the source and destination, this function automatically assigns the source and
destination to an available slot.
1.
On the MATRIX screen, hold down the [SHIFT] button and press the [7] button again.
The AUTO ASSIGN screen appears.
2.
Operate the controller (knob, slider or button) corresponding to the source you want to set.
The source is selected, and the screen changes.
3.
Operate the controller (knob, slider or button) corresponding to the destination you want to set.
The destination is selected, and the slot is confirmed.
The screen changes.
4.
Once the display changes to the MATRIX screen, use the [2] knob to set the modulation intensity.
If no slots are available, the message “No empty slot” appears, and the display automatically switches to the MATRIX screen.
Try changing the settings on the MATRIX screen to a different slot or destination that has already been set.