Roland SH-4d Digital Desktop Synthesizer - Manual (Page 175)

PATTERN REVERB
175
Parameter Value Explanation
Hi Q
0.2–9.0 Sets the bandwidth of the high frequency range.
Higher values make the bandwidth narrower.
GM2 Reverb
Parameter Value Explanation
Char
SMALL ROOM,
MEDIUM ROOM,
LARGE ROOM,
MEDIUM HALL,
LARGE HALL,
PLATE
This selects the reverb type.
Time 0–127 Adjusts the decay length of the reverb sound.
Gated Reverb
Parameter Value Explanation
Type
NORMAL This is a standard gate reverb.
REVERSE This is a reverb for which the sound ramps up in volume.
SWEEP1 The reverb sound moves from right to left.
SWEEP2 The reverb sound moves from left to right.
Pre Delay 0.0–100.0 [ms] Adjusts the delay time from when the direct sound plays until the reverb sound is heard.
Gate Time 5–500 [ms] Adjusts the decay length of the reverb sound.
Shimmer Reverb
Parameter Value Explanation
Low Damp -50–+50 Adjusts how much to attenuate the low-frequency portion of the reverb.
High Damp -50–+50 Adjusts how much to attenuate the high-frequency portion of the reverb.
Time 0.1–10.0 [s] Adjusts the decay length of the reverb sound.
Density 1–10 Adjusts the density of the reverb sound.
Pre Delay 0–200 [ms] Adjusts how long it takes until the reverb sound is heard, after the direct sound plays.
Modulation Rate 0–100 Adjusts the speed at which the reverb sound is modulated.
Modulation
Depth 0–100 Adjusts the depth to which the reverb sound is modulated.
Pitch1 Coarse
-24–+24
[semi] Adjusts the amount of pitch shift applied for pitch shift 1 (in semitones).
Pitch2 Coarse
-24–+24
[semi]
Adjusts the amount of pitch shift applied for pitch shift 2 (in semitones).
Pitch1 Feedback
-98–+98 [%] Adjusts the proportion of the delay sound that is fed back into pitch shift 1. Negative (-)
settings invert the phase.
Pitch2 Feedback
-98–+98 [%] Adjusts the proportion of the delay sound that is fed back into pitch shift 2. Negative (-)
settings invert the phase.
Level 1 0–100 Adjusts the volume of pitch shift 1.
Level 2 0–100 Adjusts the volume of pitch shift 2.
(*1) 16, 20, 25, 32, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000,
5000, 6300, 8000, 10000, 12500, 15000 [Hz], BYPASS
(*2) BYPASS, 16, 20, 25, 32, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500,
3150, 4000, 5000, 6300, 8000, 10000, 12500, 15000 [Hz]
(*3) 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz]
(*4) 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6400, 8000, 10000, 12500 [Hz],
BYPASS
(*5) 50, 64, 80, 100, 125, 160, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000 [Hz]
(*6) 4000, 5000, 6400, 8000, 10000, 12500 [Hz]