3tap pandly (3 tap pan delay), 4tap pandly (4 tap pan, Delay) – Roland SH-4d Digital Desktop Synthesizer User Manual
Page 135
MFX Parameters
135
3Tap PanDly (3 Tap Pan Delay)
Produces three delay sounds; center, left and right.
Parameter
Value
Explanation
Dly L Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
DL. Time
1–2600
Adjusts the time until the left delay sound is heard.
DLTime Nt
(P.167)
Dly R Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
DR.Time
1–2600
Adjusts the time until the right delay sound is heard.
DRTime Nt
(P.167)
Dly C Sync
OFF
、
ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
DC. Time
1–2600
Adjusts the time until the center delay sound is heard.
DCTime Nt
(P.167)
C
Feedback
-98–+98 [%]
Adjusts the proportion of the delay sound that is fed back into the
effect.
Negative (-) settings will invert the phase.
HF Damp
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300,
8000, BYPASS [Hz]
Adjusts the frequency above which sound fed back to the effect is
filtered out. If you don’t want to filter out any high frequencies, set
this parameter to BYPASS.
Left Lv
0–127
Volume of each delay sound
Right Lv
0–127
Center Lv
0–127
Low Gain
-15–+15 [dB]
Amount of boost/cut for the low-frequency range
High Gain
-15–+15 [dB]
Amount of boost/cut for the high-frequency range
Balance
D100
：
0W
～
D0
：
100W
Volume balance between the direct sound (D) and the delay sound
(W)
Level
0–127
Output Level