Roland SH-4d Digital Desktop Synthesizer - Manual (Page 80)

Main Menu (MENU)
80
Creating Phrases and Modulation (VISUAL ARPEGGIO)
This function lets you create phrases and modulation by various means.
BOUNCE
Press a keyboard button and then tilt this unit.
You can also play using an external keyboard connected to this unit.
Controller Explanation
[1] knob Sets the width of the bouncing board.
[2] knob Sets the strength of the rebound effect on the board.
BUBBLE
Press a keyboard button.
You can also play using an external keyboard connected to this unit.
Controller Explanation
[1] knob Adjusts the overall speed.
[2] knob Sets how much the tilt of this unit affects the movement of the bubbles.
[ ä ] button The bubbles are erased from first to last.
[ å ] button The bubbles are erased from last to first.
SKETCH
Draw a series of notes (a scale) on the screen and press the [ENTER] button.
Controller Explanation
[1] knob Moves the cursor left/right.
Hold down the knob and move it to draw lines.
[2] knob Moves the cursor up/down.
Hold down the knob and move it to draw lines.
[ з ] [ ж ] buttons
Sets the scale used to quantize the notes you draw (making the notes you draw fit into the scale).
If this is set to a value other than “CHROMA”, the notes that play are the closest in the selected scale to the
ones you drew.
[ д ] [ е ] buttons Sets the scale root.
Keyboard
buttons Moves the cursor to the note position (pitch) you played.
PONG
Press a keyboard button and use the [1] and [2] knobs to move the paddles.
Controller Explanation
[1] knob Moves the left paddle.
[2] knob Moves the right paddle.