Roland SH-4d Digital Desktop Synthesizer - Manual (Page 151)

MFX Parameters
151
Parameter Value Explanation
Flg Fbk
-98–+98 [%] Adjusts the proportion of the flanger sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Flg Bal
D100: 0W–D0:
100W
Adjusts the volume balance between the sound that is sent through the flanger (W) and the
sound that is not sent through the flanger (D).
Level 0–127 Output Level
DS -> Delay (Distortion -> Delay)
Parameter Value Explanation
Dist Drive
0–127 Degree of distortion
Also changes the volume.
Dist Pan L64–63R Stereo location of the distortion sound
Delay
Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System) (P.76)
D. Time 1–2600 Delay time from when the original sound is heard to when the
delay sound is heard D.Time Nt Note (P.167)
Delay Fbk
-98–+98 [%] Adjusts the proportion of the delay sound that is fed back into the
effect.
Negative (-) settings will invert the phase.
Dly HF
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which sound fed back to the effect
will be cut. If you do not want to cut the high frequencies, set this
parameter to BYPASS.
Dly Bal
D100: 0W–D0: 100W Adjusts the volume balance between the sound that is sent
through the delay (W) and the sound that is not sent through the
delay (D).
Level 0–127 Output Level
OD/DS -> T. Wah (Overdrive/Distortion -> Touch Wah)
Parameter Value Explanation
Drive
Switch
OFF, ON Turns overdrive/distortion on/off
D. Type OVERDRIVE, DISTORTION Type of distortion
Drive
0–127 Degree of distortion
Also changes the volume.
Tone 0–127 Sound quality of the Overdrive effect
Amp Switch OFF, ON Turns the Amp Simulator on/off.