When feedback mode is cross – Roland SH-4d Digital Desktop Synthesizer User Manual
Page 133
MFX Parameters
133
When Feedback Mode is CROSS:
Para
met
er
Value
Explanation
Dly
L
Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
DL.
Tim
e
1–1300
Adjusts the time until the left delay sound is heard.
DLTi
me
Nt
(P.167)
Dly
R
Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
DR.
Tim
e
1–1300
Adjusts the time until the right delay sound is heard.
DRTi
me
Nt
(P.167)
Fbk
Mod
e
NORMAL, CROSS
Selects the way in which delay sound is fed back into the effect. (See the
figures above.)
Feed
back
-98–+98 [%]
Adjusts the proportion of the delay sound that is fed back into the
effect.
Negative (-) settings will invert the phase.
HF
Dam
p
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which sound fed back to the effect is
filtered out. If you don’t want to filter out any high frequencies, set this
parameter to BYPASS.
Rate
Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
Rate
0.05–10.00 [Hz]
Frequency of modulation
Rate
Note
(P.167)
Dept
h
0–127
Depth of modulation
Phas
e
0–180 [deg]
Spatial spread of the sound
Low
Gain
-15–+15 [dB]
Amount of boost/cut for the low-frequency range