4tap pandly (4 tap pan delay) – Roland SH-4d Digital Desktop Synthesizer User Manual
Page 136
MFX Parameters
136
4Tap PanDly (4 Tap Pan Delay)
This effect has four delays.
Parameter
Value
Explanation
Dly1 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
D1.Time
1–2600
Adjusts the time from the original sound until delay 1 sounds is
heard.
D1Time
Nt
(P.167)
Dly2 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
D2.Time
1–2600
Adjusts the time from the original sound until delay 2 sounds is
heard.
D2Time
Nt
(P.167)
Dly3 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
D3.Time
1–2600
Adjusts the time from the original sound until delay 3 sounds is
heard.
D3Time
Nt
(P.167)
Dly4 Sync
OFF, ON
If this is ON, the rate synchronizes with the tempo of the rhythm.
(P.76)
D4.Time
1–2600
Adjusts the time from the original sound until delay 4 sounds is
heard.
D4Time
Nt
(P.167)
Dly1 Fbk
-98–+98 [%]
Adjusts the proportion of the delay sound that is fed back into the
effect.
Negative (-) settings will invert the phase.
HF Damp
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300,
8000, BYPASS [Hz]
Adjusts the frequency above which sound fed back to the effect is
filtered out. If you don’t want to filter out any high frequencies, set
this parameter to BYPASS.
Dly1 Lv
0–127
Volume of each delay
Dly2 Lv
0–127