Roland SH-4d Digital Desktop Synthesizer - Manual (Page 61)

Creating a Pattern (Step Sequencer)
61
For the rhythm part
1. Long-press the [1]–[16] buttons to bring up the STEP EDIT screen. While holding down the [1]–[16]
buttons, press one of the [
д ] [ е ] buttons.
The STEP EDIT screen stays open.
Without pressing the [ д ] [ е ] buttons, take your finger off the [1]–[16] buttons to close the STEP EDIT screen.
2. Press the keyboard buttons to select the instrument whose velocity or gate length you wish to edit.
Turn the [1] knob to edit the velocity.
Turn the [2] knob to edit the gate length.
The actual gate length when the pattern plays back equals the gate length set in the respective pattern plus the “Gate Length”
value set on the PATTERN SETTINGS screen.
For details, refer to “ Configuring the Patterns (P.66)”.