Roland SH-4d Digital Desktop Synthesizer - Manual (Page 78)

Main Menu (MENU)
78
CONTROLLER
Parameter Value Explanation
KBD Sw
Velo 1–127 Sets the note velocity that’s generated when you press one of the keyboard
buttons on this unit.
Knob
Mode
DIRECT, CATCH Specifies whether the parameter value corresponding to a controller is
immediately updated when you operate that controller (DIRECT) or only after
the controller reaches the same position as the parameter’s current value
(CATCH).
Note Color
WHITE, YELLOW, ORANGE, PURPLE,
PINK, SKY BLUE, PALE YELLOW,
PALE GREEN, PALE BLUE, PALE PINK
Sets the color used to light up each [1]–[16] button LED, when notes are
present in the corresponding steps (in sequencer mode).
D-MOTION
Parameter Value Explanation
Offset X
-100–
+100
Sets the output X (horizontal direction) value when this unit is placed flat.
Offset Y
-100–
+100
Sets the output Y (forward/backward direction) value when this unit is placed flat.
Sense
1–10 Sets the output sensitivity to this unit’s tilt.
Smaller values produce a greater output in respect to this unit’s tilt.
Gravity
0–10 When this unit is placed nearly flat, this sets how much force is required to return the output value to
zero.