Od/ds -> a. wah (overdrive/distortion -> auto wah) – Roland SH-4d Digital Desktop Synthesizer User Manual

Page 152

Advertising
background image

MFX Parameters

152

Parameter

Value

Explanation

AmpType

SMALL, BUILT-IN, 2-

STACK, 3-STACK

Type of guitar amp

SMALL: Small amp

BUILT-IN: Single-unit type amp

2-STACK: Large double stack amp

3-STACK: Large triple stack amp

TWah
Switch

OFF, ON

Wah on/off

TWah Mode

LPF, BPF

Filter type

LPF: The wah effect will be applied over a wide frequency range.

BPF: The wah effect will be applied over a narrow frequency range.

TWah Polar

DOWN, UP

Direction in which the filter will move

DOWN: The filter will change toward a lower frequency.
UP: The filter will change toward a higher frequency.

TWah Sens

0–127

Sensitivity with which the filter is modified

TWah

Manual

0–127

Center frequency at which the wah effect is applied

TWah Peak

0–127

Width of the frequency region at which the wah effect is applied

Increasing this value will make the frequency region narrower.

TWah Bal

D100: 0W–D0: 100W

Adjusts the volume balance between the sound that is sent through the wah (W) and

the sound that is not sent through the wah (D).

Low Gain

-15–+15 [dB]

Amount of boost/cut for the low-frequency range

High Gain

-15–+15 [dB]

Amount of boost/cut for the high-frequency range

Level

0–127

Output Level

OD/DS -> A. Wah (Overdrive/Distortion -> Auto Wah)

Parameter

Value

Explanation

Drive Switch

OFF, ON

Turns overdrive/distortion on/off

D. Type

OVERDRIVE, DISTORTION Type of distortion

Drive

0–127

Degree of distortion

Also changes the volume.

Tone

0–127

Sound quality of the Overdrive effect

Amp Switch

OFF, ON

Turns the Amp Simulator on/off.

AmpType

SMALL, BUILT-IN, 2-

STACK, 3-STACK

Type of guitar amp

SMALL: Small amp

BUILT-IN: Single-unit type amp

2-STACK: Large double stack amp
3-STACK: Large triple stack amp

AWah
Switch

OFF, ON

Wah on/off

AWah Mode

LPF, BPF

Filter type

LPF: The wah effect will be applied over a wide frequency range.

BPF: The wah effect will be applied over a narrow frequency range.

AWah
Manual

0–127

Center frequency at which the wah effect is applied

AWah Peak

0–127

Width of the frequency region at which the wah effect is applied
Increasing this value will make the frequency region narrower.

AWah Sync

OFF, ON

If this is ON, the rate synchronizes with the tempo of the rhythm.

Tempo (Pattern)

Tempo (System)

(P.76)

AWRate

0.05–10.00 [Hz]

Frequency of modulation

AWRate Nt

Note

(P.167)

AWah
Depth

0–127

Depth at which the wah effect is modulated

Advertising