Roland SH-4d Digital Desktop Synthesizer - Manual (Page 172)

PATTERN DELAY
172
Parameter Value Explanation
Trm
ModWave
This sets how the panning changes.
TRI Triangle wave
SQR Square wave
SIN Sine wave
SAW1 Sawtooth wave
SAW2
TRP Trapezoidal wave
Trm Sync OFF, ON If this is on, the tremolo synchronizes with the tempo.
Trm Hz 0.05–10.00 [Hz] Adjusts the rate of the tremolo.
Trm Note Note
Trm Depth 0–127 Adjusts the depth of the tremolo.
2Tap PanDly (2Tap Pan Delay)
Delay sound is heard in the two locations you specify.
Parameter Value Explanation
Dly Sync OFF, ON If this is ON, the delay synchronizes with the tempo.
Dly Msec 1–1300 Adjusts the time until the second delay sound is heard.
Dly Note Note
Feedback
-98–+98 [%] Adjusts the proportion of the delay sound that is fed back into the effect. Negative (-) settings
will invert the phase.
HF Damp
200–8000 [Hz],
BYPASS (*1)
Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want
to filter out any high frequencies, set this parameter to BYPASS.
Dly1 Pan L64–63R Adjusts the pan position of Delay 1.
Dly2 Pan L64–63R Adjusts the pan position of Delay 2.
Dly1 Level 0–127 Adjusts the volume of Delay 1.
Dly2 Level 0–127 Adjusts the volume of Delay 2.
3Tap PanDly (3Tap Pan Delay)
Delay sound is heard in the three locations you specify.
Parameter Value Explanation
Dly Sync OFF, ON If this is ON, the delay synchronizes with the tempo.
Dly Msec 1–2600 Delay time of the third delay sound after the original sound is heard.
Dly Note Note
Feedback
-98–+98 [%] Adjusts the proportion of the delay sound that is fed back into the effect. Negative (-) settings
will invert the phase.
HF Damp
200–8000 [Hz],
BYPASS (*1)
Adjusts the frequency above which sound fed back to the effect is filtered out. If you don’t want
to filter out any high frequencies, set this parameter to BYPASS.
Dly1 Pan L64–63R Adjusts the pan position of Delay 1.
Dly2 Pan L64–63R Adjusts the pan position of Delay 2.
Dly3 Pan L64–63R Adjusts the pan position of Delay 3.
Dly1 Level 0–127 Adjusts the volume of Delay 1.
Dly2 Level 0–127 Adjusts the volume of Delay 2.
Dly3 Level 0–127 Adjusts the volume of delay 3.
Note 1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4, 1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
(*1) 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz], BYPASS