Roland SH-4d Digital Desktop Synthesizer - Manual (Page 150)

MFX Parameters
150
DS -> Chorus (Distortion -> Chorus)
Parameter Value Explanation
Dist Drive
0–127 Degree of distortion
Also changes the volume.
Dist Pan L64–63R Stereo location of the distortion sound
Cho
PreDly
0.0–100 [ms] Adjusts the delay time from the direct sound until the chorus sound is heard.
Cho Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System) (P.76)
C. Rate 0.05–10.00 [Hz] Frequency of modulation
C.Rate Nt Note (P.167)
Cho Depth 0–127 Depth of modulation
Cho Bal
D100: 0W–D0:
100W
Adjusts the volume balance between the sound that is sent through the chorus (W) and the
sound that is not sent through the chorus (D).
Level 0–127 Output Level
DS -> Flanger (Distortion -> Flanger)
Parameter Value Explanation
Dist Drive
0–127 Degree of distortion
Also changes the volume.
Dist Pan L64–63R Stereo location of the distortion sound
Flg PreDly 0.0–100 [ms] Adjusts the delay time from the direct sound until the flanger sound is heard.
Flg Sync
OFF, ON If this is ON, the rate synchronizes with the tempo of the rhythm.
Tempo (Pattern)
Tempo (System) (P.76)
F. Rate 0.05–10.00 [Hz] Frequency of modulation
F.Rate Nt Note (P.167)
Flg Depth 0–127 Depth of modulation