Furuno RC-1500-1T - Manual (Page 101)

4-25
7. The display changes as below. You are now ready to send the neutral craft call.
*** Send message ***
CALL TYPE : NEUTRAL
CRAFT
PRIORITY : SAFETY
COM. TYPE : TELEPHONE
GO TO ALL VIEW
DSC FREQ : 2187.5 KHZ
8. Press the [CALL] key to send the neutral craft call (transmission time: approx. 7 sec.).
Neutral craft
call in progress!
SAFETY
TELEPHONE 2182.0 KHZ
TIME TO GO: 7S
DSC FREQ : 2187.5 KHZ
O
9. After the call is sent (timer counts down to zero), the DSC standby screen automatically
appears. Inform all ships (by radiotelephone) that your ship is not a participant in armed
conflict.
4.5.2 Receiving a neutral craft call
1. When a neutral craft call is received the alarm sounds and the display changes as below.
Neutral craft
call received.
FROM SHIP: 123456789
SAFETY
TELEPHONE 2182.0 KHZ
STOP ALARM
2. Press the [CANCEL] key to silence the alarm. The display changes as below.
* Received message *
JUL-23-1999-23:59 ECC: OK
NEUTRAL CRAFT
FROM SHIP: 123456789
SAFETY
TELEPHONE 2182.0 KHZ
GO TO ALL VIEW