Furuno RC-1500-1T - Manual (Page 412)

SP - 6
SPECIFICATIONS OF THE DSC/WATCH RECEIVER DSC-60
1. DSC TERMINAL
(1) Line out
0 dBm (adjustable between -10 dBm and +10 dBm),
600 ohms, balanced
(2) Line in -10 to +10 dBm, 600 ohms, balanced
(3) Frequency shift Mark: 1615 Hz, Space: 1785 Hz
(4) Baud rate 100 baud’s ± 30 x 10 -6
(5) Protocol Complies with ITU-R Rec.493-9, 541-8, 1082-1
2. GMDSS DSC WATCH KEEPING RECEIVER
(1) Receiving Frequency
For MF spec: 2187.5 kHz
For MF/HF spec: 2187.5 kHz, 4207.5 kHz, 6312 kHz, 8414.5 kHz,
12577 kHz and 16804.5 kHz
(2) Class of Emission F1B, J2B
(3) Frequency Stability within ±10 Hz
(4) Intermediate Frequency 1st: 54455 kHz, 2nd: 455 kHz
(5) Selectivity -6 dB: 270 Hz or more
-30 dB: within ±380Hz
-60 dB: within ±550Hz
(6) RF Input Impedance 50 ohms
(7) Receiving Sensitivity Better than 0dB µ (at error rate within 1%)
(8) Warming-up Time 1 minute (oven 30 minutes)
3. GENERAL WATCH KEEPING RECEIVER (OPTION)
(1) Receiving Frequency
1.6 MHz to 27.5
(2) Class of Emission F1B, J2B
(3) Frequency Stability within ±10Hz
(4) Intermediate Frequency 1st: 54455 kHz, 2nd: 455 kHz
(5) Selectivity: -6 dB: 270 to 300Hz
-30 dB: within ±380Hz
-60 dB: within ±550Hz
(6) RF Input Impedance: 50 ohms
(7) Receiving Sensitivity: Better than 0dB µ (at error rate within 1%)
(8) Warming-up Time: 1 minute (oven 30 minutes)