Furuno RC-1500-1T - Manual (Page 227)

7-7
8. Press the [ ] key to display the Scanning Group List.
Scanning Group List
MARITEX-A
MARITEX-B
MARITEX-C
MARITEX-D
MARITEX-E
MARITEX-F
Figure 7-5 Scanning group list (example)
9. Select scan group.
10. Press the [Enter] key. To enter another station name, repeat the
above procedure from step 2.
Note: To establish the connection with a MARITEX station, the
receiving frequencies in the scan group registered are scanned to
detect a free signal from the station. If the free signal is detected, a
message will be automatically transmitted to the station.