Furuno RC-1500-1T - Manual (Page 93)

4-17
4.3 Group Call
A group call is for calling a specific group by entering its group ID.
4.3.1 Sending a group call
1. Press the [CALL] key at the DSC standby screen, and press the [ENT] key to open the CALL
TYPE menu.
*** Send message ***
RELAY SEL
POLLING
NEUTRAL
MEDICAL
RELAY ALL
DISTRESS
#
GROUP ID
PRIORITY
COM. TYPE
COM. FREQ
DSC FREQ
: Individual
PSTN CALL
TEST CALL
ALL SHIPS
GROUP CALL
AREA CALL
POSITION
$
INDIVIDUAL
CALL TYPE
If this part of the menu appears
use
# to scroll the menu.
2. Use  or  to select GROUP CALL and press the [ENT] key.
3. Press the [ENT] key to open the GROUP ID menu.
GO TO ALL VIEW
*** Send message ***
CALL TYPE
PRIORITY
COM. TYPE
COM. FREQ
DSC FREQ
: GROUP CALL
: ROUTINE
: TELEPHONE
: NO INFO
: 2M-INTL
GROUP ID 000000000
How to input group ID automatically
If you have registered some group IDs (see page 6-4),
you can insert them into your message as follows:
1. Press the [FILE] key after completing step 2 in the
above procedure. The following display appears.
2. Select file which contains ID you want to use
(press
"
to show ID number).
3. Press the [ENT] key to insert ID number in message.
Group ID file
004. FURUNO
"
500. MARINE "
777. ELECTRIC
"
Note: You can print the
Group ID file list by pressing
the [8/PRINT] key.
# UP $ DOWN
4. Key in group ID (nine digits) where to send the message and press the [ENT] key.
5. Press the [ENT] key to open the PRIORITY menu.
GO TO ALL VIEW
*** Send message ***
CALL TYPE
GROUP ID
COM. TYPE
COM. FREQ NO INFO
DSC FREQ
: GROUP CALL
: 012345678
: 2M-INTL
PRIORITY
SAFETY
URGENCY
ROUTINE
6. Select priority desired and press the [ENT] key.