Furuno RC-1500-1T - Manual (Page 131)

6-1
6. PREPARING SEND MESSAGES
In Chapter 4 you learned how to prepare and send individual, group, geographical area and
PSTN calls. In this chapter you will learn how to prepare and store them (including test calls) for
future transmission. 150 such files can be stored.
6.1 Preparing Individual Call Messages
1. Press the [#/SETUP] key to open the Setup menu.
2. Select MESSAGE and press the [ENT] key.
3. Press the [ENT] key to open the CALL TYPE menu.
* Message file entry
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: TELEPHONE
: NO INFO
: 2M-INTL
INDIVIDUAL
PSTN CALL
GROUP CALL
AREA CALL
TEST CALL
4. Use  or  to select INDIVIDUAL and press the [ENT] key.
5. Press the [ENT] key to open the STATION ID entry window.
* Message file entry
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: TELEPHONE
: NO INFO
: 2M-INTL
- - - - - - - - -
How to input station ID automatically
If you have previously registered some station IDs,
you can insert them into your message as follows:
1. Press the [FILE] key after completing step 4 in the
above procedure. The following display appears.
2. Select COAST STATION or SHIP STATION and
press the [ENT] key.
3. Select file which contains ID you want to use
(press
"
to show ID number).
4. Press the [ENT] key to insert ID number in message.
Select ID file
COAST STATION
SHIP STATION
Note: You can print the
Select ID file list by pressing
the [8/PRINT] key.
6. Key in ID of coast station or ship station which is to receive the call and press the [ENT] key.