Furuno RC-1500-1T - Manual (Page 97)

4-21
5. Press the [ENT] key to open the PRIORITY menu.
GO TO ALL VIEW
*** Send message ***
CALL TYPE
AREA : 12˚N 123˚W
↓
12˚
→
12˚
COM. TYPE
COM. FREQ
DSC FREQ
: AREA CALL
: Routine
: Telephone
: NO INFO
: 2M-INTL
SAFETY
URGENCY
ROUTINE
PRIORITY
6. Select priority desired and press the [ENT] key.
7. Press the [ENT] key to open the COM. TYPE menu.
TELEPHONE
NBDP-FEC
$ SPECIAL
TTY RCV
TTY
MORSE KEY
MORSE TAPE
FACSIMILE
#
MAIN
For ROUTINE
TELEPHONE
NBDP-FEC
For SAFETY or
URGENCY
GO TO ALL VIEW
*** Send message ***
CALL TYPE
AREA : 12˚N 123˚W
↓
12˚
→
12˚
PRIORITY
COM. FREQ
DSC FREQ
: AREA CALL
: Routine
: Telephone
: No infor
: 2M-INTL
NBDP-FEC
$ SPECIAL
TELEPHONE
COM. TYPE
8. Select communication type desired and press the [ENT] key.
9. Press the [ENT] key to open the COM. FREQ menu.
GO TO ALL VIEW
*** Send message ***
CALL TYPE
AREA: 12˚N 123˚W
↓
12˚
→
12˚
PRIORITY
COM. TYPE
DSC FREQ
: AREA CALL
: 2M-INTL
COM. FREQ
FREQUENCY
CHANNEL
NO INFO
To select a user channel
If you have previously registered user channels (see page 7-10),
you can insert one into your message as follows:
1. Press the [FILE] key after completing step 8 in the
above procedure. The following display appears.
2. Select file and press the [ENT] key to insert channel no.
in message.
User channel file
00201. TX: 2301.0 RX: 2701.0
00202. TX: 2302.0 RX: 2702.0
00301. TX: 3301.0 RX: 3701.0
00302. TX: 3302.0 TX: 3702.0
Note: You can print the
User channel file list by pressing
the [8/PRINT] key.
$
UP
#
DOWN
10. Select communication frequency desired and press the [ENT] key. (See page 4-6 for details.)