Furuno RC-1500-1T - Manual (Page 81)

4-5
4. Key in ID of station where to send the message and then press the [ENT] key.
5. Press the [ENT] key to open the PRIORITY menu.
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: TELEPHONE
: NO INFOR
: 2M-INTL
GO TO ALL VIEW
*** Send message ***
PRIORITY :
BUSINESS
SAFETY
URGENCY
ROUTINE
6. Select appropriate priority (normally ROUTINE) and press the [ENT] key.
7. Press the [ENT] key to open the COM. TYPE menu.
CALL TYPE
STATION ID
PRIORITY
COM. FREQ
DSC FREQ
: INDIVIDUAL
: ---------
: ROUTINE
: NO INFOR
: 2M-INTL
*** Send message ***
TELEPHONE
NBDP-FEC
Routine or
Business Priority For Safety or
Urgency Priority
COM. TYPE :
TTY RCV
TTY
MORSE KEY
MORSE TAPE
FACSIMILE
DATA
# MAIN
V32
* MODEM TYPE *
V21 V26 BIS
V22 V26 TER
V22 BIS V27 TER
V23
TELEPHONE
NBDP-ARQ
NBDP-FEC
$ SPECIAL
For SPECIAL items, the radiotelephone
is not controlled automatically. Set
frequency, class of emission, etc. at
the radiotelephone.
Press [ENT]
to display.
8. Select communications type desired and press the [ENT] key.
9. Press the [ENT] key to open the COM. FREQ menu.
*** Send message ***
CALL TYPE
STATION ID : 123456789
PRIORITY
COM. TYPE
DSC FREQ
: INDIVIDUAL
: 12M-INTL
COM. FREQ
FREQUENCY
CHANNEL
POSITION*
NO INFO
GO TO ALL VIEW
* POSITION is displayed if a coast
station is specified at step 3.
To select a user channel
If you have previously registered user channels (see page 7-10),
you can insert one into your message as follows:
1. Press the [FILE] key after completing step 8 in the
above procedure. The following display appears.
2. Select file and press the [ENT] key to insert channel no.
in message.
User channel file
00201. TX: 2301.0 RX: 2701.0
00202. TX: 2302.0 RX: 2702.0
00301. TX: 3301.0 RX: 3701.0
00302. TX: 3302.0 TX: 3702.0
Note: You can print the
User channel file list by pressing
the [8/PRINT] key.
$ UP # DOWN
10. Select item desired and press the [ENT] key. For FREQUENCY and CHANNEL see “How to
Set Working Frequency” on the next page. NO INFO and POSITION lets the receiving
station set the working frequency. Select NO INFO or POSITION to send message to a coast
station. Select FREQUENCY or CHANNEL to send message to ship station.