Furuno RC-1500-1T - Manual (Page 53)

2-13
By Cursor Pad
a) Press  to shift the cursor to the band entry location.
b) Use  or  to set band. Band is displayed in the following sequence.
2 4 6 8 12 16 18 22 25 001 002----- 029
ITU band
User channel
c) Press.
d) Use  or  to set channel.
e) Press the [ENT] key. The Tx and Rx frequencies of the channel entered appear.
Setting Range
ITU Band:
2/4/6/8/12/16/18/24/25
User Band: 01-029
ITU Channel: XX001 - XX193
User Channel: XXX01 - XXX99
Tx/Rx frequency selection
Select the Tx or Rx field and press the [ENT] key. Enter desired frequency with the numeric keys.
Press the [ENT] key to finish.
Note: If you enter the Tx frequency, the same frequency is entered to the Rx frequency.
Select Tx (or Rx)
and press [ENT].
POWER: HIGH
VOLUME 24
TUNE
Tx : 12 329.0
KHZ
KHZ
POWER: HIGH
VOLUME 24
TUNE
Tx
Rx
: 12 329.0
KHZ
: 13 176.00 0. 00
KHZ
MODE: TELEPHONE
CH: 12034
MODE: TELEPHONE
CH: 12034
Rx : 13 176.00
Power selection
Select the POWER field with the Cursor Pad and press the [ENT] key. Select power desired
among HIGH, MID and LOW with the Cursor Pad and press the [ENT] key.
Select POWER
and press [ENT].
POWER: HIGH
VOLUME 24
TUNE
: HIGH POWER:
VOLUME 24
TUNE
: OK
:
Tx: 12329.0
KHZ
Rx: 13176.00
KHZ
Tx: 12329.0
KHZ
Rx: 13176.00
KHZ
MODE: TELEPHONE
CH: 12034
HIGH
MID
LOW
MODE: TELEPHONE
CH: 12034
Note: Some FURUNO SSB radiotelephones do not provide the power selection HIGH, MID
or LOW.