Furuno RC-1500-1T - Manual (Page 290)

2-8
Login
1. Confirm that “SYNC (NCS)” appears at the bottom of the screen.
2. Press [F7] to display the Options menu.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Current State: IDLE
DCE Ver **
SYNC ( NCS )
NCS: IOR LOGOUT 97-08-04 02:01 (UTC)
1. Login
2. Logout
3. Abort
4. Select NCS
5. Ocean Region
6. Test
Options
Figure 2-15 Options menu
3. Press [1] to display the Login screen.
Options
Login
Start
No Yes
Figure 2-16 Login screen
Note: The communication unit must be idle to login. When it is
not idle, “Communication Unit is not IDLE now. Cannot
start login.” appears. Press any key to return to the standby
display. Wait until the communication unit becomes idle.
4. Press [Enter] to start login.