Furuno RC-1500-1T User Manual
Page 212
5-6
4. Transmit message by one of the following methods;
Send a file from a floppy disk
a) Press function key [F7] (WRU) to receive the answerback
code of the other station. Verify that the code from the sta-
tion called is correct.
b) Press function key [F8] (HR) to transmit your own identity
(answerback code).
c) Press function key [F3] and then the [3] key to display the
Send screen. Select file to send and press the [Enter] key.
Send appears in inverse video while the file is being trans-
mitted.
Send File
Filename
<Parent Directory>
00FOX .MES
ASCII .TXT
BEEP .EXE
DPX .AUT
DPX .BAT
DPX .BSC
DPX .CNL
29 Files exist 247271424 bytes free
Size
95
613
28854
1830
349
28000
1000
12:24
08:07
16:15
10:36
10:02
13:54
17:11
10:02
Data & Time
96-11-15
96-11-15
96-11-15
96-11-15
96-11-15
96-11-15
96-11-15
96-11-15
To select:ENTER To view:SPACE To quit:ESC
Figure 5-8 Send file screen
Sending volume (percentage of message transmitted, counts
upward as the message is being transmitted), ARQ error count
and ARQ transmission time appear on the display.
Station Name : CHOUSHI-8M
Frequency (T/R) : 8765.00 / 8965.00(kHz) Comm Mode :ARQ
Comm Status :
Connect
Send
Lock
Error
Sending Volume : 100(%) ARQ Error : 0 ARQ Time : 0(sec)
1996-11-15 14:28 (JST)
Caps
1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break
Figure 5-9 Communication status display
Type a message from keyboard
After exchanging answerback code by the function key [F7]
(WRU) and [F8] (HR), type your message directly from the
keyboard.
5. To change direction of traffic, press either function key [F9]
(OVER), or [+] and [?]. Then, the other station becomes the
information sending station, your station the information re-
ceiving station.