Furuno RC-1500-1T - Manual (Page 49)

2-9
2.9 Selection of On-screen Items
Menu and calling operations are executed by selecting on-screen items. The example below
shows how to select items and options from the Alarm menu.
1. Press the [#/SETUP] key to display the Setup menu.
**** Setup menu ****
SCAN FREQ
USER CH
VOLUME
TEST
SYSTEM
ALARM
AUTO ACK
ERASE
MESSAGE
POSITION
PRINT OUT
2. Use the Cursor Pad to select a menu and then press the [ENT] key. For example, select the
ALARM menu.
**** Alarm setup ***
RCVD CALL
OLD POSITION
POSITION OLDER
EXT ALARM: DSTRS/URG
: ON
: ON
: 4.0 H
INTERNAL AUDIO ALARM
3. Use  or  to select menu item desired and press the [ENT] key. For example, select
RCVD CALL. The following window appears, superimposed on the main window.
**** Alarm setup ***
RCVD CALL
OLD POSITION
POSITION OLDER
EXT ALARM : DSTRS/URG
: ON
: ON
: 4.0 H
INTERNAL AUDIO ALARM
ON
N
OFF
4. Use  or  to select option.
5. Press the [ENT] key to register your selection and the [CANCEL] key twice to return to the
DSC standby screen.