Furuno RC-1500-1T - Manual (Page 335)

4-5
(9) Press [ ] to send the cursor to the Station ID line.
(10)Press [Enter] to open the window for station ID entry.
Figure 4-5 Transmit message menu, station ID window opened
(11)Type either recipient’s telex subscriber number (ship-to-shore)
or receiving MES INM (ship-to-ship).
(12)Press [Enter] to close the window.
(13)Go to step 9 at the top of page 4-7.
Destination type: FAX
(1) Press [ ] to advance the cursor to the Modem Type line.
(2) Press [Enter] to open the selection window.
Figure 4-6 Transmit message menu, modem type window opened
(3) Select “T30”.
(4) Press [Enter] to close the selection window.
(5) Go to step 9 at the top of page 4-7.
Destination type: E-mail
(1) Press [ ] to advance the cursor to the Address line.