Preparations for transmission and reception, 1 registering answerback code & id codes – Furuno RC-1500-1T User Manual
Page 187
3-1
3. PREPARATIONS FOR
TRANSMISSION AND RECEPTION
This chapter provides the procedures necessary for preparing the
DP-6 for transmitting and receiving. For automatic telex, you will
need to register the following;
• Your ship's ID and answerback codes
• Stations
• Timer programs
• Scan channel groups
• User channels
3.1 Registering Answerback Code & ID Codes
Enter your ship's answerback code and ID code as follows.
Note:
The answerback and ID codes cannot be changed once en-
tered; be sure to enter the codes correctly.
Registering Answerback Code
1. Press function key [F5] and then the [5] key. The display should
look something like Figure 3-1.
Answerback Code
Answerback Code Entry
Figure 3-1 Answerback code entry screen
2. Enter your ship's answerback code (max. 20 characters, includ-
ing spaces) and press the [Enter] key. The prompt OK/CAN-
CEL asks for verification of data. If code is correct, press the
[Enter] key again.
Note:
Example of answerback code 12345789 ABCF X.