Furuno RC-1500-1T User Manual
Page 231
7-11
Preparing a macrofile for store-and-forward Telex
You will need a macrofile to enable automatic message transmis-
sion on store-and-forward Telex. After preparing it, save it to the
hard disk or a floppy disk for future use.
1. Press function key [F1] to display the File menu.
2. Press the [1] key.
3. Prepare macrofile.
The figure below shows the minimum information required to send
a store-and-forward Telex message in MARITEX.
< [1] UNTITLED1 >
@FREE 10
@CALL S: MARITEX
@WRU
@CASE GA+?
@SEND TLX80212345+
@CASE MSG+?
@SEND B:ABC
@SEND NNNN
@CASE GA+?
@SEND BRK+
1
2
3
4
5
1
Free-signal search time (10 minutes
2
Station name (Example: MARITEX)
Who are you?
Station identity exchange
3
Subscriber's Telex number (in example, 802 is country
code of Hong Kong) for store-and-forward Telex
4
Location and name of file message
5
Request for termination of message
Figure 7-6 Example macrofile for store-and-forward Telex
4. Press function key [F1] to display the File menu.