Furuno RC-1500-1T - Manual (Page 410)

SP - 4
SPECIFICATIONS OF FS-5000 SSB RADIOTELEPHONE
1. GENERAL
(1) Communication System Full-duplex, semi-duplex or simplex
(2) Class of Emission J3E, A1A, F1B (J2B), J3C
(3) Frequency Range Transmit: 1.6MHz to 30MHz
(4) Number of Channels User programmable: 400TX/RX pairs
All ITU channels incorporated. (Incl DSC channels)
(5) Frequency Accuracy ± 10Hz (-20 °C to 50 °C )
(6) Environmental Conditions
Ambient Temperature Range -20 °C to 55 °C
Relative Humidity 93% max. (at 40 °C )
(7) Power Supply & 24VDC +30% to -10%
Power Consumption 3A (RX)
60A (TX power peak)
37A (TX power reduced)
(8) Coating Color Main unit front panel: N3.0
(not changeable) Main unit cabinet: 2.5GY5/1.5
Antenna Coupler: N9.5
2. TRANSMITTER
(1) Frequency Range 1.6065 MHz to 29.9999 MHz (100 Hz steps)
(2) RF Output Power 400 Wpep +0/-1.4dB at 50 ohms load (at 24VDC, IEC rec.)
Reduction to 60Wpep or less
(3) Modulation AF Response 350Hz to 2700Hz
(4) Keying Speed CW: 25 bauds, TELEX: 100 bauds
(5) AF Input -46 dBm/600 ohms
(6) Tone Frequency 1500 Hz
3. RECEIVER
(1) Receiving System Double-conversion superheterodyne
IF: 45455 kHz and 455 kHz
(2) Frequency Range 10 kHz 29.99999 MHz (10 Hz steps)
(3) Sensitivity Input level at 50ohms to produce SINAD 20dB
Frequency Range J3E
100kHz to 300kHz 25 dB
µ
V
300kHz to 1.6MHz 15 dB
µ
V
1.6MHz to 30MHz 3 dB
µ
V
(4) Intermodulation 90 dB
µ
V (CEPT method test)
(5) Cross Modulation 94 dB
µ
V (CEPT method test)