Furuno RC-1500-1T - Manual (Page 214)

5-8
5.7 Communication Example
This section shows how to register your station with a coast station
(Singapore), in order to connect with a land line and send mes-
sages to other stations.
Contact the coast station following the procedure on page 5-3. Then,
register your station's name, call sign, answerback code and selcall
number and AAIC (Accounting Authority Identification Code) with
the coast station.
You can call the Singapore coast station on ITU channels 809, 821
or 1201 (other channels may also be used). Use communication
mode ARQ. The Singapore coast station ID no. is 4620.
Registration procedure
1. Call Singapore coast station following the procedure on page
5-3.
2. Singapore requests your AAIC.
3. Type your AAIC.
4. Singapore asks for your callsign. Send your station's name,
callsign, answerback code and selcall number.
5. Singapore sends time required to register your station.
6. Transmit end code.
9VG SERADIO RS
12345 FURUNO X
54321 ABCDE J
9VG SERADIO RS
MOM
F
UGOX DE 9VG RGR GA X X PSE SUPPLY YOUR AAIC HW +?
OPR +
AAIC
AA01 +?
RGR PSE GIVE YOUR SHIP NAME CALLSGI CALLSIGN HW +?
I INTRODUCE MY INFO LATER
PLS AGAIN
AAAAAA
CS- 1111
ANSWERBACK CODE- ccccc cccc c
AAIC- 9999
SELCALL- 56789
OK HW +?
PSE BE SURE W ICH AAIC CFM PSE HW +?
bb01 SO + +?
RGR PSE OFF TX X HERE EEE CALL BACK 2MINS TIME X HERE WILL
INPUT YOUR DATA
CU BI HW +?
OK TKS BI BI
Exchange answerback codes
Singapore requests your AAIC.
Singapore requests your station's name and callsign.
Enter your stations name, callsign, answerback,
code and selcall number.
Time required to reigister your station
Call operator.