Furuno RC-1500-1T User Manual
Page 144
7-4
Default: ABLE
**
Auto ack setup
**
COMPLY TYPE
: ABLE
UNABLE REASON :
NO REASON GIVEN
POSITION CALL
: OFF
POLLING CALL
: ON
ABLE
UNABLE
Choose ABLE or UNABLE as automatic
acknowledgement reply to Individual, Position
and Polling messages.
Note: Automatic acknowledge is automatically
disabled when Rx message contains error,
as required by law. Further, automatic
acknowledge is disabled in case of OFF
HOOK.
Automatic acknowledge of Position or
Polling request is not available when
UNABLE is selected.
Default: NO REASON
NO REASON
BUSY
EQUIP DISABLED
MODE NOT USABLE
CH NOT USABLE
Sets reason for UNABLE.
Note: This menu is the same as manual
acknowledgement. EQUIPMENT
DISABLED is shown in messages when
EQUIP DISABLED is selected.
Default: ON
Overrides/follows AUTO ACK setting
in case of position.
OFF: Disables automatic
acknowledgement of position
request.
ON: Enables automatic
acknowledgement of position
request.
[ENT] key
[ENT] key
[ENT] key
[ENT] key
ON
OFF
Default: ON
Overrides/follows AUTO ACK setting
in case of polling.
OFF: Disables automatic
acknowledgement of polling
request.
ON: Enables automatic
acknowledgement of polling
request.
ON
OFF
or
to set.
or
to set.
or
to set.
or
to set.