Furuno RC-1500-1T - Manual (Page 120)

4-44
7. Press the [ENT] key to open the DSC FREQ menu.
GO TO ALL VIEW
*** Send message ***
CALL TYPE
COAST ID
: PSTN CALL
: 123456789
TEL NO. : 123456789012345
DSC FREQ :12M-INTL
6 MHz
8 MHz
$
12 MHz
4 MHz
2 MHz
16 MHz
18 MHz
22 MHz
25 MHz
#
OTHER
MANUAL
Use
$
to scroll
menu.
OTHER: Special, private channel
MANUAL: Manual tuning of
radiotelphone
8. Select DSC band and press the [ENT] key. Select DSC frequency and press the [ENT] key.
The display changes as below.
*** Send message ***
DSC FREQ : 12577.5 KHZ
GO TO ALL VIEW
CALL TYPE : PSTN CALL
COAST ID : 001234567
TEL NO. : 1234567890123456
9. Press the [CALL] key to send the PSTN call (transmission time: about 7 sec.). The display
shows the following message.
PSTN request
call in progress!
TIME TO GO: 7S
TO COAST : 001234567
TEL NO. : 1234567890123456
DSC FREQ : 12577.5 KHZ
10. After the call is sent one of the following messages appears.
Waiting for
acknowledgement.
TIME TO GO: 25S
DSC FREQ : 12577.5 KHZ
FROM COAST : 001234567
TEL NO. : 1234567890123456
Unable acknowledge
call received.
STOP ALARM
FROM COAST : 001234567
TEL NO. : 1234567890123456
QUEUE INDICATION