Furuno RC-1500-1T - Manual (Page 347)

4-17
The 2-digit code services
A range of special safety and general maritime services, known as
the 2-digit code services, may be received. The list on the next page
shows the 2-digit code services available.
To access a 2-digit code service;
1. Using the text editor, prepare message requesting a 2-digit code
service. (Refer to next page.)
2. Press [F3] to display the Transmit menu.
3. Press [Enter] to display the Transmit Message.
Figure 4-26 Transmit message menu
4. Press [ ] three times to place the cursor on the Destination Type
line.
5. Press [Enter] to open the selection window.
6. Select “SPEC” (Special).
7. Press [Enter] to close the selection window.
8. Press [ ] to place the cursor on the Station ID line.
9. Press [Enter] to open the window for station ID entry.
10.Key in 2-digit code referring to the tables on the next page.
11. Press [Enter] to close the window.