Furuno RC-1500-1T - Manual (Page 341)

4-11
b) Select a file.
c) Tap the space bar to display a portion of the file in the view
window.
d) Press [Enter]. The Message File screen appears with the file
selected.
7. Press [ ] to advance the cursor to the Station Name line.
8. Press [Enter] to open the Station List.
Figure 4-15 Select station screen
9. Select station and press [Enter].
To select more than one station, press [Space] bar after selecting
station. An asterisk appears next to station(s) selected.
Note :Different types or prefix code of messages cannot be tranmitted
simultneously.
Figure 4-16 With asterisk mark
10.Press [ ] key to advance the cursor to the LES ID line.
11. Press [Enter] to open the LES Table.