Furuno RC-1500-1T - Manual (Page 59)

3-5
12. The SEND MESSAGE screen is redisplayed. Press the [ENT] key to open the COM. TYPE
menu.
*** Send message ***
NATURE: FLOODING
POS: 35˚N 135˚00E AT 23:25
DISTRESS CALL TYPE:
GO TO ALL VIEW
DSC FREQ : 2187.5 KHZ
COM. TYPE: TELEPHONE
NBDP-FEC
TELEPHONE
13. Select TELEPHONE and press the [ENT] key. (Telephone is the usual mode, however NBDP
may also be used.)
14. Press the [ENT] key to open the DSC FREQ menu.
*** Send message ***
NATURE: FLOSIGNATED
POS: 35˚N 135˚00E AT 23:25
DISTRESS CALL TYPE:
GO TO ALL VIEW
COM. TYPE: TELEPHONE
DSC FREQ : 2187.5 KHZ
4207.5
6312.0
8414.5
12577.0
16804.5
MANUAL
2187.5
AUTO
15. Select a DSC frequency (normally 2187.5 kHz) and press the [ENT] key. (AUTO retransmits
the distress alert on 2 MHz, 8 MHz, 16 MHz, 4 MHz, 6 MHz and 2 MHz in sequence if the
distress alert is not acknowledged and MANUAL is for manual selection of frequency at the
radiotelephone when there is “remote error.”)
DSC SSB radiotelephone NBDP-FEC
2187.5 kHz
4207.5 kHz
6312.0 kHz
8414.5 kHz
12577.0 kHz
16804.5 kHz 2182.0 kHz
4125.0 kHz
6215.0 kHz
8291.0 kHz
12290.0 kHz
16420.0 kHz 2174.5 kHz
4177.5 kHz
6268.0 kHz
8376.5 kHz
12520.0 kHz
16695.0 kHz
16. The display changes as below.
*** Send message ***
NATURE: FLOODING
POS: 35˚N 135˚00E AT 23:25
DISTRESS CALL TYPE:
COM. TYPE : TELEPHONE
DSC FREQ : 2187.5 KHZ
GO TO ALL VIEW