Furuno RC-1500-1T - Manual (Page 364)

5-4
Setting a message report
1. Press [F5] to display the Position Reports menu.
Figure 5-4 Position reports menu
2. Press [2] to display the Message Report.
Figure 5-5 Message report menu
3. Press [Enter] to open the window for PIN code entry.
4. Key in the PIN code.
PIN code (max. 8 digits) should be agreed upon with your recipi-
ent beforehand.
5. Press [Enter] to close the window.
6. Press [ ].
7. Press [Enter] to open the selection window.
8. Select “ON” or “OFF”.
ON: Message report on
OFF: Message report off
9. Press [Enter] to close the selection window.
10.Press [ ].
11. Press [Enter] to display the station list.
12.Select a station.