Furuno RC-1500-1T - Manual (Page 111)

4-35
9. The display now looks something like the following.
CALL TYPE: POSITION
REQUEST
STATION ID : 123456789
PRIORITY : ROUTINE
*** Send message ***
DSC FREQ : 2177.0 KHZ
GO TO ALL VIEW
10. Press the [CALL] key to send the call (transmission time: about 7 sec.). The following display
appears.
Position request
call in progress!
TIME TO GO: 7S
DSC FREQ : 2177.0 KHZ
STATION ID : 123456789
ROUTINE
11. After the call has been sent (the timer counts down to zero) the following display appears.
Waiting for pos
acknowledgment.
TIME TO GO: 4M30S
DSC FREQ : 2177.0 KHZ
STATION ID : 123456789
ROUTINE
12. One of the following messages appears. (“No response! Try calling again?” appears after the
time has counted down to zero, meaning there is no response from the receiving station.)
No response!
Try calling again?
DSC FREQ : 2177.0 KHZ
STATION ID : 123456789
ROUTINE
Pos acknowledge
call received.
FROM SHIP : 123456789
ROUTINE
POS : 12˚34N 123˚45E AT 12:34
Position acknowledge call received No response
STOP ALARM CALL AGAIN