Furuno RC-1500-1T - Manual (Page 89)

4-13
5. If you want to re-send the message press  to select RE-SEND and press the [ENT] key.
*** Send message ***
COM. FREQ : NO INFO
DSC FREQ : 2M-INTL
SHIP ID : 123456789
PRIORITY : ROUTINE
COM. TYPE : TELEPHONE
CALL TYPE : INDIVIDUAL
GO TO ALL VIEW
6. Press the [CALL] key to re-send the call.
Sending automatic acknowledge (ACK BQ) with comply type “UNA BLE”
1. When an individual call is received and the automatic acknowledge feature and comply type
is “UNABLE,” the display shown below appears, indicating the auto acknowledge call with
UNABLE (ACK BQ) call is being sent.
Unable acknowledge
call in progress!
TIME TO GO : 6S
DSC FREQ : 12577.5 KHZ
BUSY
TO SHIP : 121234567
ROUTINE
2. It takes about 7 sec. to transmit the call, after which the audio alarm sounds and the following
message appears.
Unable acknowledge
call transmitted.
STOP ALARM
BUSY
TO SHIP : 121234567
ROUTINE
3. Press the [CANCEL] key to silence the alarm and the following display appears.
* Xmitted message *
JUL-23-1999-23:01
UNABLE ACKNOWLEDGE
ALL VIEW RE-SEND
BUSY
TO SHIP : 121234567
ROUTINE