YSI 5500D-1 - Manual (Page 111)

YSI 5X00
221
YSI 5X00
220
Menu Maps

continued next page
Run Screen → Menus → Sensor Setup → Aux 3 ‐ 6 (Temperature)
Sensor Setup
Aux 3 (Temperature)
Aux 4 (Temperature)
Aux 5 (Temperature)
Aux 6 (Temperature)
Temperature (Enabled)
Control Mode (Set Point)
T
Set Point
PID/PWM
Display Format (Celsius)
T
Fahrenheit
Celsius
Set Point control only Chiller On (10 Min)
1‐255

Time Units
T
Sec
Min
Hours
Set Point control only Chiller Hold Off (8 Min)
1‐255

Time Units
T
Sec
Min
Hours
Alarms (Disabled)
Alarm Low (23.5c)*
0.1c to 45.0c

Relay (Disabled)
Alarm Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Relay 5
Relay 6
Relay 7
Relay 8
Set Point control only Range Low (24.0c)*

Relay (Disabled)
Range Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Relay 5
Relay 6
Relay 7
Relay 8
Menu Maps
Run Screen → Menus → Sensor Setup →
Aux 3 ‐ 6 (Temperature) continued from previous page
Sensor Setup
Set Point (25.0 c)*
24.1c to 45.0c

PID/PWM control only Control Up/Down (Rising)
T
Rising
PID/PWM control only P.I.D. Interval (100.00)
1.00 to 999.90

PID/PWM control only P.I.D. Reset Interval (20.00) 
PID/PWM control only P.I.D. Gain (2000) 
PID/PWM control only P.I.D. Relay (Disabled)
Range Low (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Relay 5
Relay 6
Relay 7
Relay 8
Set Point control only Range High (750)* (Suffix)

Relay (Disabled)
Range High (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Relay 5
Relay 6
Relay 7 Relay 7
Relay 8
Alarm High (1000)* (Suffix)

Relay (Disabled)
Alarm High (Disabled)
Instrument (Local Machine)
Relay (Relay 1)
T
Relay1
Relay2
Relay 3
Relay 4
Relay 5
Relay 6
Relay 7
Relay 8