YSI 5500D-1 - Manual (Page 49)

YSI 5X00
97
YSI 5X00
96
Subnet Mask
Menus → System → Communications → Ethernet → Subnet Mask
A Subnet mask address can only be configured when DHCP is disabled. The subnet
mask number helps to define the relationship between the host (computers, rout-
ers, switches, etc.) and the rest of the network. Consult the network administrator
when configuring this menu.
Notes:
- When DHCP is enabled, the Subnet Mask address is not updated at the Subnet
Mask menu.
- AquaManager users should program the Subnet mask either by force serial
port using AquaManager or locally at the 5X00. Poll node using RS232 com-
munication . Next upload configuration information including: static IP, port,
subnet, and gateway addresses.
- Numbers between 0-255 are valid for each of the four (4) Subnet Mask IP
Address fields.
Gateway
Menus → System → Communications → Ethernet → Gateway
The Gateway address can only be configured when DHCP is disabled. A gateway IP
refers to a device on a network which sends local network traffic to other networks.
Consult the network administrator when configuring this menu.
Notes:
- When DHCP is enabled, the Gateway address is not updated at the Gateway
menu.
- AquaManager users should program the Gateway address either by force
serial port using AquaManager or locally at the 5X00. Poll node using RS232
communication . Next upload configuration information including: static IP,
port, subnet, and gateway addresses.
- Numbers between 0-255 are valid for each of the four (4) Gateway IP Ad-
dress fields.
Port
Menus → System → Communications → Ethernet → Port
The default port number for the ethernet module is 10001. Consult the network
administrator when configuring this menu.
Note:
- AquaManager users should program the port number either by force serial
Configuring the 5X00
port using AquaManager or locally at the 5X00. Poll node using RS232 com-
munication . Next upload configuration information including: static IP, port,
subnet, and gateway addresses.
DNS Address
Menus → System → Communications → Ethernet → DNS
Domain Name Service (DNS) refers to the server, or workstation, used to convert
domain names into IP addresses.
Notes:
- With DHCP enabled, the serial to ethernet device will acquire SMTP and DNS
addresses during initialization.
- When DHCP is enabled, the DNS address is not updated at the IP address
menu.
- Numbers between 0-255 are valid for each of the four (4) DNS IP Address fields.
Email Addresses
Menus → System → Communications → Ethernet → Email Address
→ Email Address
→ Email Address
→ CC/Email Address
Up to four email addresses can be configured for 5X00 emails. At a minimum, the
first email address and the CC/email address must be configured. If the CC/email
address is not configured, 5X00 email alarms will contain no alarm information.
The email ‘from’ address will be the email address entered in the first Email Ad-
dress menu.
Notes:
- See Send Test Email Msg - page 101 to verify proper configuration of ethernet
menus.
- On a network, both master and slave alarm emails are sent to the configured
email addresses in the master.
- Test the alarm email delivery by creating an alarm condition at the 5X00 and
verify the email(s) is received.
- The CC/Email address must be configured when using 5X00 email alarming.
Specific alarm system information will not be sent if the CC/Email address
menu is not configured with a valid email address.
- Use AquaManager to easily configure email addresses using the PC keyboard.
See AquaManager on line help for additional information.
- If Autopoller is being used for AquaManager email alarming on a TCP/IP
connection, it is strongly recommended that the 5X00 email alarming using
the serial to ethernet device be disabled. When the ethernet device sends
email alarms, all Autopoller SMS communication is suspended. This could
Configuring the 5X00