Edit block 0 <active block – CONTREX CX-1200 User Manual
Page 168
Advertising
5 - 75
The Edit Block 0-7 screens are accessed through
—> Main Menu / Block Setup <—
EDIT BLOCK 0
<Active Block>
0
*
0
*
0
*
0
*
P1/4
->NOT USED
Blk0 Val 1
Blk0 Val 2
Blk0 Val 3
Blk0 Val 4
->NOT USED
->NOT USED
->Line Spd SP
Displays the name of the
Control Parameter that has
been assigned to the prior
line. This Control
Parameter is assigned in the
Edit Block Parms screens.
Use the Par keys to select a
line (make it active).
(CP-541)
Enter a parameter value.
Press the Enter key.
(CP-540)
Enter a parameter value.
Press the Enter key.
(CP-542)
Enter a parameter value.
Press the Enter key.
(CP-543)
Enter a parameter value.
Press the Enter key.
Advertising