CONTREX CX-1200 - Manual (Page 236)

6 - 25
CONTROL OVERRIDES P3/4
Use the Control Overrides screen (page 3) to effect the following control functions:
Negate Scaled Ref (change direction),
Stop Ramp
Stop Integral
Open Loop
Lead Sync Disable
Foll Sync Disable
Sync Disable
Scroll the cursor to the item that you want to activate and press Enter. The highlighter will appear and will
remain on the function(s) that are active. If you want to deactivate a function, scroll the cursor to the
function that you want to deactivate and press Enter. The highlighter will disappear and that function is no
longer active.
The Cntrl Latch bits are OR'ed with the corresponding PLC Bits. Use either the PLC or the keypad to
activate these functions.