CONTREX CX-1200 - Manual (Page 233)

6 - 22
ANALOG OUT MONITOR P2/2
The Analog Out Monitor screen (page 2) monitors the output signal and displays the parameters for the
analog output (AO).
AO Bits
Analog Output Bits (MP-166) displays the present value, in DAC Bits, of the Auxiliary Analog Output.
AO Signal
Analog Output Signal (MP-167) displays the present value, in either volts or milliamps of the Auxiliary Analog Output,
relative to AO Mode (CP-291).
AO Mode
Analog Output Mode (CP-291) identifies the mode of operation and calibration that are used for the Auxiliary Board
Analog Output signal.
2 = Current
1 = Voltage (default)