Yokogawa DR240 - Manual (Page 113)

6-15 IM DR231-01E
Setting the Recording Conditions
6
HEADER LINE No.=1
1 2 3 4 5
LINE1=
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
>1=[ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ]
↓ %&()+-*/.:- - - 0123456789 ABC- - -KL ↑
***SET OK***
TITLE=
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
>=[ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ]
↓ %&()+-*/.:- - - 0123456789 ABC- - -KL ↑
***SET OK***
HEADER
TITLE
ENTER ENTER
ENTER
ENTER ENTER
ESC
ESC
From the previous page
Entering a Message
MESSAGE No. (selection of the message No.)
Up to 20 messages can be entered.
MSG01 to 20 (entering the message)
The message contents can be entered here using up to 16 characters. Characters and numerals
can be selected from the menu. The default setting is all spaces.
COPY (copying messages)
The contents of an entered message (message No. at the left side of the setting) can be copied to
another message number (at the right side of the setting). You cannot copy to the same message
number.
Printing out a message
A message can be printed out on the occurrence of an alarm (refer to 6.5 on page 6-11 for
details), using the FUNC menu (refer to 7.3 on page 7-3 for details), or using the event/action
function (refer to 9.1 on page 9-1 for details).
Displaying a message
A message can be displayed on the main display using the even/action function.
Entering a Header
HEADER LINE No. (selection of the header line)
One header can consist of up to five lines.
LINE 1 to 5 (entering one line of the header)
The header contents can be entered here using up to 60 characters for each line (for DR130) or
80 characters for each line (for DR231/DR241), and thus up to 300 characters (for DR130) or
400 characters (for DR231/DR241) for the entire header. Characters and numerals can be
selected from the menu. The default setting is all spaces.
Entering a Title
One title can be set. The configurable number of characters is 1 to 32. Characters and numerals
can be selected from the menu. The default setting is all spaces.
Inserting/Deleting a Character or Numeral
Press the PRINT(DEL) key to delete a set character or numeral. The digit at the location of the
cursor will be deleted.
Press the FUNC(INS) key to insert a character or numeral. The digit at the location of the cursor
will become a space, while all the characters/numeral at the right side of the cursor will move one
digit to the right.
6.7 Entering Messages, Headers and Title