Yokogawa DR240 - Manual (Page 34)

Functions
2-13 IM DR231-01E
2
Manual Printout
One scan of measurement values of selected channels will be recorded as digital values together
with the date and time. This printout can be executed by key operation or by event/action function
(refer to page 2-18). Refer to page 2-6, 2-7 for a recording example.
Header Printout
For the header, you can print as many as 60 characters each on 5 lines (DR130) or as many as 80
characters each on 5 lines (DR231/241) and its recording can be executed by key operation.
Additional Printouts
While recording analog trends it is possible to have engineering units, tags, scales, alarm, title,
messages, etc. printed along with the measurement values and the date/time.
• Engineering units; these will be printed in combination wiht the linear scaling function (refer to
page 2-17)
• Channel No. or tag; a preset tag can be printed for each channel; the selection whether to print
the channel No. or the tag (refer to page 2-8) can also be done
• Scale printout; values corresponding to the scales will be printed (refer to page 2-10)
• Alarm printout; alarm information (refer to page 2-16) will be printed upon occurrence (or
release) of an alarm. You can also set a message to appear upon occurrence of an alarm
• Title printout; A title of up to 32 characters can be printed. Furthermore, the title can be set to
be printed at regular intervals (refer to title pitch on page 2-8)
• Message printout; Recording of messages of up to 16 characters can be executed by key
operation or event/action function. Time will also be printed together with the message. Up to
20 different messages can be entered.
Set-Up List Printout
Each item as described in Ch. 10 will be printed.
Match Time Function
You can preset a time when you want recording to start/stop using the event/action function (refer
to page 2-18). When this time is reached, recording in the analog trend or logging mode will start/
stop.
2.3 Recording Functions