Yokogawa DR240 - Manual (Page 136)

9-13 IM DR231-01E
Event/Action Function and Other Functions
9
Selecting range copying (COPY RANGE)
• ON: Copies the type of input, measuring ranges, recording spans, linear scaling, engineering
units, and tags set.
• OFF: The copying of ranges is disabled.
Selecting alarm copying
• ON: Copies the type of alarm, alarm values, and relay (internal switch) setting.
• OFF: The copying of alarms is disabled.
Selecting copying of other items (COPY OTHER)
• ON: Copies setting recording zones, partial compressions, dot-recording ON/OFF, digital
printing ON/OFF, manual printing ON/OFF, alarm printout ON1/ON2/OFF, scale-value
printout ON1/ON2/ON3/OFF, list-printout ON/OFF, average numbers in moving averages and
interpolation ON/OFF.
• OFF: The copying of other items is disabled.
Setting a copy-source channel
Sets a copy-source channel with up to three characters. For details on these characters, see
Section 4-1, “Using Auto Mode,” on page 4-2.
Setting a destination channel to be copied
Sets a channel to which the setting data in the source channel are copied.
• When the COPY RANGE, COPY ALARM and COPY OTHER are set to ON, individual set
data are copied.
• For the setting of a destination channel number, see Section 5.1, “Setting the Type of Input and
Recording Span,” on page 5-2.
Setting a computation channel to be copied
Copies the following settings.
Range copy ON : Computation equation, unit, tag
Alarm copy ON : Alarm
Other copy ON : Zone, partial, trend ON/OFF, digital print ON/OFF, scale print ON/OFF,
manual print ON/OFF, alarm print ON/OFF, list print ON/OFF, linear
interpolation
9.2 Copying