Set oa name, Set oa uid, Set securesh server kex dhg1 – HP Onboard Administrator User Manual
Page 100: Set serial baud
Enclosure network configuration commands 100
SET OA NAME
•
Command:
SET OA NAME [<bay number> | ACTIVE | STANDBY] "<OA name>"
•
Description:
Sets the Onboard Administrator name. If a bay number is not specified, the command defaults to the
active Onboard Administrator.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
The Onboard Administrator name is 1 to 32 characters long including all alphanumeric characters and
the dash (-).
SET OA UID
•
Command:
SET OA UID [<bay number> | ACTIVE | STANDBY] {ON | OFF}
•
Description:
Sets the Onboard Administrator UID on or off.
If you do not specify a bay number, the command defaults to the active Onboard Administrator.
•
Access level/Bay level:
All
•
Restrictions:
None
SET SECURESH SERVER KEX DHG1
•
Command:
SET SECURESH SERVER KEX DHG1 [ ENABLE | DISABLE ]
•
Description:
Enables insecure diffie-hellman-group1-sha1 key exchange on the Onboard Administrator's SSH
server.
•
Access level/Bay level:
OA administrator
•
Restrictions:
The default is disabled on Onboard Administrator 4.01 and later. Enable only if compatibility with
older client applications is required.
SET SERIAL BAUD
•
Command: