Remove language, Restart oa, Set date – HP Onboard Administrator User Manual
Page 114
Enclosure management commands 114
•
Description:
Enables Link Loss Failover for Onboard Administrator Redundancy.
•
Access level/Bay level:
Operator, Administrator
•
Restrictions:
You must have OA permission to perform this command
REMOVE LANGUAGE
•
Command:
REMOVE LANGUAGE { <language> | <language code> }
•
Description:
Removes the user specified language. <language> is the language name. <Language code> is a
two-letter designation for a language (EN—English, JA—Japanese, ZH—Chinese). To get a list of
installed language packs, use SHOW LANGUAGES command.
•
Access level/Bay level:
OA administrator, OA operator
•
Restriction:
None
RESTART OA
•
Command:
RESTART OA [<bay number>]
•
Description:
Resets the Onboard Administrator module specified by <bay number>. If no bay number is given, then
the Onboard Administrator the user is logged in to is restarted.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
None
SET DATE
•
Command:
SET DATE MMDDhhmm [[CC]YY][TZ]
•
Description:
Sets the date of the enclosure with the following definitions:
o
MM: Month
o
DD: Day