Set ipconfig, Set login_banner_text – HP Onboard Administrator User Manual
Page 97
Enclosure network configuration commands 97
o
If the change is to FIPS MODE ON or FIPS MODE DEBUG, strong passwords are enabled, minimum
password length is set to eight characters, and a new Administrator account password is requested.
•
Access level/Bay level:
OA administrator
•
Restrictions:
o
When the Onboard Administrator is operating in FIPS Mode, certificates must have a minimum RSA
key length of 2048 bits, and the signature hash algorithm must be SHA1, SHA-224, SHA-256,
SHA-384, or SHA-512. Certificates are used in various features such as the following:
—
Onboard Administrator certificate signing requests (for more information, see the GENERATE
) command)
—
LDAP (for more information, see "Directory commands (on page
)")
—
Two-Factor Authentication (for more information, see "Two-Factor Authentication commands (on
page
)")
—
Insight Remote Support (for more information, see "HP Insight Remote Support commands (on
)")
—
HP SIM Single Sign-On (for more information, see "HP SIM commands (on page
)")
SET IPCONFIG
•
Command:
SET IPCONFIG {DHCP | STATIC} [<OA bay number>] [DYNAMICDNS] <ip address>
<netmask> [<gateway> [<DNS1address> [<DNS2 address>]]]
•
Description:
o
Configures IP settings for the Onboard Administrator to DHCP mode or static mode.
o
In STATIC mode, the IP address and Netmask are set to <ip address> and <netmask> respectively.
These settings take effect immediately. If the Gateway address and/or DNS addresses are cleared,
they are omitted. The Gateway and DNS address can also be set by using the SET OA GATEWAY
and ADD OA DNS commands.
o
SET IPCONFIG STATIC [<OA bay number>] <ip address> <netmask> [<gateway>
[<DNS1 address> [<DNS2 address>]]]
o
In DHCP mode, the IP address, Netmask, Gateway address, and DNS addresses are obtained from
the DHCP. This setting immediately takes effect. If DYNAMICDNS is specified, then the DNS server
is notified of the new IP address of the system when it is received from the DHCP server.
o
SET IPCONFIG DHCP [<OA bay number>] [DYNAMICDNS]
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
None
SET LOGIN_BANNER_TEXT
•
Command: