Show interconnect info – HP Onboard Administrator User Manual
Page 173
Interconnect management commands 173
SHOW INTERCONNECT INFO
•
Command:
SHOW INTERCONNECT INFO {PORT MAP | POWERDELAY | SESSIONS | STATUS} [ALL |
<bay number> | <bay number>-<bay number>]
•
Description:
Displays:
o
Interconnect type
o
IPv4 information
o
IPv6 information
o
Manufacturer name
o
Product name
o
Product part number
o
Product version
o
Product serial number
o
Asset tag
o
VLAN ID
•
Access level/Bay level:
All
Bay specific
•
Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
•
Example:
OA-0018FE27577F> show interconnect info all
show interconnect info all
1. Ethernet
Product Name: HP VC Flex-10 Enet Module
Width: Single
URL to Management interface: http://172.16.1.149/
In-Band IPv4 Address: 172.16.1.149
User Assigned Name:
Part Number: 455880-B21
Spare Part Number: 456095-001
Serial Number: TW2931005D
Temperature Sensor: Present
JS2 Connector: Absent
Internal Ethernet Interface to OA: Present
Internal Ethernet Route to OA: Enabled
Internal Serial Interface to OA: Present
Internal Serial Route to OA: Enabled
Serial Port Baud Rate: 115200
External Serial Port Interface: Absent
External Ethernet Interface: Absent
Manufacturer: HP
Firmware Version: 4.10
VLAN ID: 1