Reboot server, Set nic, Set server boot – HP Onboard Administrator User Manual
Page 154
Blade management commands 154
REBOOT SERVER
•
Command:
REBOOT SERVER { ALL | <bay number> [{ , | - } <bay number>]} [FORCE] [{ NORMAL
|PXE | HDD | RBSU | CD | FLOPPY | USB }]
•
Description:
o
Sends a request to the server to perform a system reset.
o
If the FORCE option is specified, a request is sent to the server to perform a cold boot resulting in the
server being power cycled.
o
When a one-time boot device is specified, the server boots to the target device on the resulting
server reboot.
WARNING:
Executing this command does not provide the server OS the opportunity to perform
a graceful shutdown.
•
Access level/Bay level:
Administrator, operator
Bay specific
•
Restrictions:
o
You must have access to the specified bay number.
o
This command is not applicable to storage blades.
SET NIC
•
Command:
SET NIC {AUTO | FORCED}
•
Description:
Configures the external NIC for Auto-negotiation or forced link settings.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
None
SET SERVER BOOT
•
Command:
SET SERVER BOOT {FIRST | ONCE} {NORMAL | CD | HDD | PXE | USB | FLOPPY} {ALL
| <bay number> [{ - | , } <bay number>]}
•
Description:
o
Stores a setting for the IPL to be passed to the specified servers at the next reboot.
o
SET SERVER BOOT FIRST (on page
) sets the boot order of the blade.